Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Coordonate system
- Thread starter kthant
- Start date
fredericmenage
Mechanical
Hi,
just open the template file(s) in Solid Edge (C:/Program Files/Solid Edge V20/Templates). Start the command called 'coordinate system' and choose the 'key-in' option then just accept the different steps without changed and the coordinate system should be created at 0,0,0. Save the template file.
Fred
just open the template file(s) in Solid Edge (C:/Program Files/Solid Edge V20/Templates). Start the command called 'coordinate system' and choose the 'key-in' option then just accept the different steps without changed and the coordinate system should be created at 0,0,0. Save the template file.
Fred
- Status
Similar threads
