Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
copper nickel alloy
- Thread starter nawlins
- Start date
EdStainless
Materials
Must be a variation of Monel 400.
63-70% Ni, up to 5% Fe+Si+Mn (they each have limits), bal Cu
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
63-70% Ni, up to 5% Fe+Si+Mn (they each have limits), bal Cu
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
- Status
Similar threads
- Locked
- Question