Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Copy command copies entities to active layer even though "copy on active layer" is off 1

Status
Not open for further replies.
Michael Koenig

Michael Koenig

Mechanical
May 18, 2018
1
I came across the same issue described in thread1480-431555 and wanted to share the solution.

Disabling the following option resolved the issue.

Toolbox tab or pull down menu > Settings > Layers > Enable predefined layering

Cheers,
Michael
 
 https://files.engineering.com/getfile.aspx?folder=7cbe3f64-498a-4812-a397-afa83fccf991&file=Enable_predefined_layering.png
Status
Not open for further replies.

Similar threads

sdz
  • Locked
  • Question
Setting default layer colours
Replies
0
Views
623
sdz
sdz
edmeister
  • Locked
  • Question
Layer change Default
Replies
0
Views
572
edmeister
edmeister
dh416
  • Locked
  • Question
entities with different z values
Replies
1
Views
658
MShetty
MShetty
PLCAlligator
  • Locked
  • Question
Unable to Import a PDF into a DWG/DXF File in Draftsight 2020 Enterprise
Replies
0
Views
940
PLCAlligator
PLCAlligator
Gbruce
  • Locked
  • Question
Draftsight copy and rotate in one command from an icon 2
Replies
7
Views
394
Gbruce
Gbruce

Part and Inventory Search

Sponsor

Back
Top Bottom