Copy frequency results to a dynamic study issue

[mountainous]

thread1183-252555

I basically have the same question as the above thread, does anybody have any tips?
When the error message mentions in-plane loading, what plane are they talking about? I don't have any remote loads in my frequency sim (at least, none that I know about).

Thanks.

 

[kellnerp]

Frequency studies with beam mesh, inplane loading effect due to applied loads or any type of remote loading

Pretty simple really. Cosmos use certain types of elements to either attach a beam mesh to a solid, or a remote load to a solid that are not amenable to a dynamic study. Inplane loading is a geometric effect which brings with it some non-linear effects which again is not amenable to a dynamic study.

TOP
CSWP, BSSE

http://www.engtran.com

http://www.niswug.org

"Node news is good news."