Copy parameters from one part to another 1

[uglyjoe]

I have several hundred old(but still good)parts that need additional parameters added to them. All the new parts we create have the parameters attached to a "start part." I would like to be able to copy the new parameters(about 25 or so) into the old part so I don't have to create each one. Is there an easy way to do this?

 

[TXS]

I had to do this myself not too long ago. I jsut created a mapkey, recorded the keystrokes when updating the first part and then ran it on the rest of the parts.

MM

http://www.txsdesign.com/

 

[RocketRonnie]

ModelCheck can do this also.

 

[onlyadrafter]

Hello,

Another way of doing this is to create te parameters in the RELATIONS, and then just cut and paste them into each model.
Long winded I know, but it is a way.




----------------------------------
Hope this helps.
----------------------------------

maybe only a drafter
but the best user at this company!

 

[RocketRonnie]

I've just found another way from

http://www.spekan.com,

a batch utility which will run a mapkey on multiple files:

http://www.spekan.com/innotiv/index.php?mnu=dwnl&sub=batch

This company has some other good Pro/E utilities such as purge (including sub-directories) - all free!!
This was recommended from PTC:

http://www.ptc.com/cs/tpi/22494.htm