Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Correction factor for an air tank safety valve

Status
Not open for further replies.
chicopee

chicopee

Mechanical
Feb 15, 2003
6,199
Does anyone know of the correction factor of an air tank safety valve relieving capacity to be used on a nitrogen gas tank? I would not expect it to be much.
 
Status
Not open for further replies.

Similar threads

EMANUELE GUERRINI
  • Locked
  • Question
ASME I Boiler with 15 PSI Pressure - Can I Use an ASME IV Safety Valve?
Replies
2
Views
430
The Obturator
The Obturator
Vahid.b
  • Locked
  • Question
Caustic tank- Material selection 1
Replies
3
Views
155
Heaviside1925
Heaviside1925
Tony39
  • Locked
  • Helpful tip
ASME B31.12 & Mf (performance factor)
Replies
0
Views
159
Tony39
Tony39
YuJie_PV
  • Question
An ASME interpretation regarding UW-11(a)(5)(-b) 2
Replies
2
Views
1K
YuJie_PV
YuJie_PV
Zachary Gagnon
  • Locked
  • Question
Coupling a DN400/PN10 flange to a a B16.5/150 Butterfly valve
Replies
7
Views
176
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top Bottom