Vicker85
Mechanical
- Jan 27, 2014
- 31
Hello Experts,
Could someone guide on CORROSION ALLOWANCE requirements on Heat Exchanger Tubes of different materials (including Carbon Steel) per requirements of VGB-S-110-R-00 (Heat exchangers and boilers in the steam-water cycle of thermal power plants). So, essentially for heat exchangers in Power Plants.
Unfortunately, I do not have this VGB standard and therefore this question.
I am aware that TEMA and HEI do NOT recommend any corrosion allowance on tubes of any material.
Any guidance shall be very helpful. Thank you!
Could someone guide on CORROSION ALLOWANCE requirements on Heat Exchanger Tubes of different materials (including Carbon Steel) per requirements of VGB-S-110-R-00 (Heat exchangers and boilers in the steam-water cycle of thermal power plants). So, essentially for heat exchangers in Power Plants.
Unfortunately, I do not have this VGB standard and therefore this question.
I am aware that TEMA and HEI do NOT recommend any corrosion allowance on tubes of any material.
Any guidance shall be very helpful. Thank you!
