May 13, 2008 #1 arto Mechanical Jun 19, 2002 712 Has anyone ever run into corrosion troubles from using low melting temp Bismuth Alloys to bend 316L tubing? (i.e., Cerrobend: http://www.cerrometal.com/lowmelt.html http://www.hitechalloys.com/hitechalloys_005.htm )
Has anyone ever run into corrosion troubles from using low melting temp Bismuth Alloys to bend 316L tubing? (i.e., Cerrobend: http://www.cerrometal.com/lowmelt.html http://www.hitechalloys.com/hitechalloys_005.htm )
May 13, 2008 #2 unclesyd Materials Aug 21, 2002 9,819 I've seen it use hundreds of times on 304, 316, and 321 SS tubing with no problems. The only problem I've heard of with these alloys is getting them too hot. Upvote 0 Downvote
I've seen it use hundreds of times on 304, 316, and 321 SS tubing with no problems. The only problem I've heard of with these alloys is getting them too hot.
