CORROSION TABLE RELATED TO CHEMICAL SUBSTANCIES

[Welchita]

Hi Fellows!

I have a pharmacy lab, which I have to treat in terms of ventilation/hvac.
The substancies which are manipulated in process are
Glicerine´
eters
acetone
benzoico acid
boric acid
borat sodio
tartaric acid
sodio bicarbonat
eosine
etanol
dietilic eter
sidio hipoclorit
iodine potassic
mercurochrome
hydrogene peroxid
liquid vaseline

Maybe, there's only a few left.

I'm looking for the corrosion table having those kind/family of substancies to realise the requirements I have to fullfil in order to select the correct materials, concerning the HVAC installation, air ducts and airs units, "UTANS" as well air extracting ventilators.
Thank you in advance for any tip.
Cheers,
Welch

 

[mjh368]

my company makes wet prccessing equipment out of many plastic parts. therefore we are always dealing with chemical compat of PLASTICS. IF plasic or rubber materials will be used i have found "chemical resistance of plastics and elastomers" from PDL to be the best resource for compat of plastics. unlike most resources there is lost of data points for changes in concentration and temperature. not sure what the best is for metal but lets see what out forum buddies have..................

 

[EdStainless]

Compass Corrosion Guide.

http://www.compasspublications.com/guides.htm

Good general information about many materials and chemicals.

= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection

http://www.trent-tube.com/contact/Tech_Assist.cfm