Corrosion website 1

[strider6]

Dear All

I'm trying to build a free website where i can share every type of information relating to Corrosion & Materials.
I'd appreciate your comments and suggestions.

xoomer.alice.it/corrosion

Thanks

Strider6

 

[metengr]

Looking forward to visiting it. Let us know when you complete it.

 

[0707]

It will be a good idea. As I work in an oil refinery,from my point of vew, your website should have a on line forum discussion dedicated to oil refining in what it concerns corrosion,process, design,materials,new technologies,maintenance, inspection,FCCU reactor & regenerator case stories,Hydrocracker and Coker case stories and also Refinery acident failures.
This is maybe too much for you!

Good luck and let us know when you complete it.

Regards

luismarques

 

[ndeguy]

strider6

Its a laudable intention, but are you aware of Pierre Roberge's "corrosion-doctors.org" web-site. How will your web-site differ?

Nigel Armstrong
Karachaganak Petroleum
Kazakhstan

 

[strider6]

Nigel,

I've used a lot of time the corrosion-doctor website and i found it very useful.
However looking on the internet i've never found a website where is possible to find all kind of information that i need, as a corrosion engineer, for my job like; standard, materials properties, guidelines for welding and materials selection..
For exmaple on the corrosion-doctor i've never seen a link to the Norsok Software for CO2 corrosion, or to other Software, or links to website reagarding materials properties.
Or i've found a lot of good guidelines for welding and materials selection that are not mentioned.
My website was born as a personal tool for my job, where i'll link all the website and documents that i use. Now i think that it can be useful also to other people involved in Corrosion & MAterials selection, as a starting point when searching for all kind of information related to Corrosion & MAterials selection.
I've used also a tool of Google to make websearch restricted to website that in my opinion are useful for a Corrosion Engineer so to have more accurate resuts, it's just an idea maybe it will be useful.
It's a new website and i'll try to updated it whit new informations.

Thanks
Regards

Vict

http://xoomer.alice.it/corrosion

http://corrosionist.blogspot.com