Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

COSMOSMOTION 2008

Status
Not open for further replies.

MohammadB84

Bioengineer
Jan 25, 2008
11
Hi,

Just wondering if anyone has any idea where I can find some usefull (free) tutorials on COSMOSMOTION 2008. I need to use it to simulate dynamics of a device I'm testing.
One more question now that I'm making this thread, again in COSMOSMOTION, in the rotary motors there are 4 or 5 options such as distance, oscillating, expression and so on. anyone knows what distance mean, when the motor is a rotary? what does the angle refere to?

Many thanks
 
Replies continue below

Recommended for you

Hi,

At help in SW and on youtube. Just google "cosmos motion"

The motor properties are all explained in help > SolidWorks Help and then just tupe physical simulation in the Index tab.

I guess 'distance' is the distance that the rotors diameter (the surface or edge you select) covers when it is turning.
Hope this helps

Regards
 
 http://files.engineering.com/getfile.aspx?folder=685a591a-384b-4d97-b1c5-f4fef4c1c8c6&file=SW_physicalM.JPG
Status
Not open for further replies.

Part and Inventory Search

Sponsor