cost of unigraphics

[balderdash72]

I work for a company that is considering an aquisition of one licesne (For Unigraphics NX 2) in addition to the four we already have. No one in my office seems to have any real idea of the cost, and I have not been able to contact unigraphics. One of our engineers said that it would cost $25,000 dollars, but I am a bit skeptical. If you have any ideas or knowledge in this area, it would be greatly appreciated. Thanks for your help and consideration.

 

[Dave K]

Thats a question for your sales rep, since it will depend on what bundles you are adding.

-Dave
Everything should be designed as simple as possible, but not simpler.

 

[looslib]

ptices can range from ~$8K-25K, depending on the configuration or bundle.


"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[wmalan]

If your looking at a full manufacturing bundle (andvanced manufacturing, that figure is in the ballpark.

The fact you have 4 already should give you a discount

--
Bill