Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Counterforts

Status
Not open for further replies.
waskillywabbit

waskillywabbit

Mechanical
Feb 26, 2004
302
I have a customer requesting the use of "counterforts" in addition to (2) saddles for extra support as the plant location is in a high seismic area. Can someone steer me in the right direction? Never seen/heard of such a thing before used in this manner.

Thanks.

Brian
Pressure Vessels and Autoclave Systems

The above comments/opinions are solely my own and not those of McAbee Construction.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Most companies do not permit the use of third saddle. However, there is no restriction to provide one. The wrapper plate of third saddle support shall not be welded to the vessel shell.
 
Upvote 0 Downvote
Forgive me, but I don't understand the relevance of your reply. The vessel is adequately supported by (2) saddles...my question is about counterforts and exactly what they are, not multiple saddles. I've found "counterforts walls" but they don't look like anything more than a gussetted wall. How would counterforts work w/ a saddle? Are they gussetted saddles? An additional support w/ gussetts attached to the vessel?

Brian
Pressure Vessels and Autoclave Systems

The above comments/opinions are solely my own and not those of McAbee Construction.
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top Bottom