Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Course in light weight structures 2

Status
Not open for further replies.

ryan_struct

Aerospace
Oct 24, 2015
15
AE
Hello there,
I wish to take a short open course in Lightweight structures. On searching the edx,coursera etc I couldn't find any such courses under structural engineering or civil engineering. So alternatively i was thinking to take some courses in aeronautical engineering category. As I'm coming from a civil engineering background could someone help me which course should i take under aeronautical engineering in order to study about lightweight structures?.
Thanks in advance
 
Replies continue below

Recommended for you

For light weight structures, aluminum alloys are the 'natural material of choice' for light weight structures... unless of course, you REALLY mean 'composites'.

The Aluminum Association has several design manuals for lightweight structures that a CE will be far more familiar with... as 'starters'.
AA ASD-2017 Aluminum Standards and Data

AA ADM Aluminum Design Manual

AA T8 Design for Aluminum - A Guide for Automotive Engineers

AA ABC Aluminum in Bridge Construction: Perspective on Design, Construction and Performance

AA 23 Welding Aluminum: Theory and Practice Second Edition

AA 38 Structural Design with Aluminum

Aircraft structures need a whole different 'perspective, background' for reasons that are a bit complex to list, in this forum and my available time.

"A designer knows he has achieved perfection not when there is nothing left to add, but when there is nothing left to take away." --Antoine de Saint-Exupery

Regards, Wil Taylor

o Trust - But Verify!
o We believe to be true what we prefer to be true. [Unknown]
o For those who believe, no proof is required; for those who cannot believe, no proof is possible. [variation,Stuart Chase]
o Unfortunately, in science what You 'believe' is irrelevant. ["Orion", Homebuiltairplanes.com forum]
 
There are basically only two things you can do:
> minimize the physical structure's volume, while still maintaining adequate structural performance
> minimize the physical density, while still maintaining adequate structural performance

TTFN (ta ta for now)
I can do absolutely anything. I'm an expert! faq731-376 forum1529 Entire Forum list
 
This online course from Technical University Delft seems to be exactly what you are asking for:


TUDelft said:
Weight reduction is a key factor in the development of materials and components for use in many industries. Lightweight structures are widely used for this purpose. However, these structures present challenges: they need to be light but also safe, durable and easy to maintain. How can this be done?

This course provides an introduction to lightweight structures, starting with the "trinity" - the interaction between shape design, base material and manufacturing. The evidence gained from both successes and failures demonstrates that the interaction between these three elements is crucial for successful designs and end products.

No one believes the theory except the one who developed it. Everyone believes the experiment except the one who ran it.
STF
 
Hi sparweb , This was exactly the course I was looking for. Thank you.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top