Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creating plain strain elements in UGNX 8.5 or 9.0

Status
Not open for further replies.
Emiliano87

Emiliano87

Mechanical
Oct 4, 2013
11
Hi, I wanted to know if it is possible to create plain strain elements in NX or if I just need to edit the .dat file and replace the name of the element. Anyone knows?
 
Status
Not open for further replies.

Similar threads

jmarkus
  • Locked
  • Question
NX SimCenter 3D Nastran SOL 106 - Creating 'aligned' GAP elements
Replies
7
Views
294
SWComposites
SWComposites
jmarkus
  • Locked
  • Question
Nastran SOL 106 - Bi-/Tri-Linear Stress Strain result from Non-linear Material curve 1
Replies
8
Views
279
tim1958
tim1958
aabaig2022
  • Locked
  • Question
Multipoint Constraint Equations for Rigid Body Elements in MSC Nastran 1
Replies
3
Views
121
dmapguru
dmapguru
S
  • Question
Problem in Modal analysis 1
Replies
4
Views
2K
dmapguru
dmapguru
Gabrieldondeu
  • Locked
  • Question
Freq response (SOL 111) of a composite model on Nastran: no stress calculated in pcomp elements
Replies
1
Views
108
dmapguru
dmapguru

Part and Inventory Search

Sponsor

Back
Top Bottom