Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cross-reference

Status
Not open for further replies.

JohnAtoZ

Aerospace
Mar 23, 2009
1
I am trying to find a cross-reference from the Boeing number BACB30LE3HU7 to any mil-spec or manufacturer number.
Does anyone have any list showing this cross? Thanks.
 
Replies continue below

Recommended for you

Check "D–590 BOEING TO VENDOR CROSS REFERENCE INDEX" or contact Boeing spares.

I am not familiar with this specific bolt.
 
When in doubt - D-590.

Off the cuff, I'd say Alcoa/Fairchild/Voi-shan is a possible manufacturer for this bolt.
 
From the Spec Sheet:
PROCUREMENT
AIR INDUSTRIES CORPORATION (CAGE CODE 06725)
ALCOA FASTENING SYSTEMS – INDUSTRY (TEMPLE) (CAGE CODE 06950) 20
ALCOA FASTENING SYSTEMS – INDUSTRY (UNRUH) (CAGE CODE 1RC86) 21
FEDERAL MANUFACTURING CORPORATION (CAGE CODE 17943)
HUCK INTERNATIONAL INC, LAKEWOOD OPERATIONS (CAGE CODE 97928) 14
P B FASTENERS, DIVISION OF PAUL R BRILES, INC (CAGE CODE 27624)
SONIC INDUSTRIES INC (CAGE CODE 57928)
SPS TECHNOLOGIES, AEROSPACE PRODUCTS DIVISION (JENKINTOWN)
(CAGE CODE 56878)
VALLEY–TODECO INC (CAGE CODE 06710)

D-590: Not listed
737 SRM Fastener Sub lists BACB30US()K()as alternate.
No other Equivalent Fastener

Sorry.
 
I used to work at Boeing. We used to specify an oval-type series of locking nuts. I am looking for a metric (M4) series. Any idea where to get these small metric nuts?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor