Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cross Walk Striping Tabulation

Status
Not open for further replies.

jtkelly913

Civil/Environmental
Mar 28, 2014
2
0
0
US
Is there a standard for tabulating the square footage of a cross walk or do you just add up the area of the individual stripes along the crossing?
 
Replies continue below

Recommended for you

The specification you are using should spell it out. For example, New York State DOT measures crosswalks and stop lines in terms of the equivalent length of 4" wide stripe, so a 1' x 24' crosswalk line would be 72 linear feet.
 
Status
Not open for further replies.
Back
Top