Oct 15, 2010 #1 moon161 Mechanical Dec 15, 2007 1,184 ACAD 2007, Curves and splines render correctly in model space, show as straight in viewport. Regen makes no difference. Any ideas?
ACAD 2007, Curves and splines render correctly in model space, show as straight in viewport. Regen makes no difference. Any ideas?
Oct 15, 2010 #2 lpseifert Civil/Environmental Oct 13, 2004 260 By chance did you try Regenall? ____________________ Civil 3D 2008, Terramodel Upvote 0 Downvote
Oct 16, 2010 #3 chicopee Mechanical Feb 15, 2003 6,199 Are the curves and splines in 3D? Upvote 0 Downvote
Oct 21, 2010 Thread starter #4 moon161 Mechanical Dec 15, 2007 1,184 REGENALL - Didn't work Curves & Splines - 2D entities in 3D dwg. What worked- Zoom way in on affected details (so far that you cant see them), then regen. Upvote 0 Downvote
REGENALL - Didn't work Curves & Splines - 2D entities in 3D dwg. What worked- Zoom way in on affected details (so far that you cant see them), then regen.
Oct 22, 2010 #5 tr1ntx Mechanical Jul 20, 2010 285 Tools Menu > Options (at bottom) > Display Tab "Arc and Circle Smoothness" box > can be set as high as 20000 "Segments in a Polyline Curve" box > can be set as high as 2047 That might help. Upvote 0 Downvote
Tools Menu > Options (at bottom) > Display Tab "Arc and Circle Smoothness" box > can be set as high as 20000 "Segments in a Polyline Curve" box > can be set as high as 2047 That might help.
