-
1
- #1
scottmaha
Mechanical
- May 6, 2002
- 28
we have fanuc controls on our machining centers(16M). i program these machines using several different macros i have come up with fitting the custom macro B format. for example, i have a macro for thread milling and for chamfering the top and bottom of bored holes using a 45 degree sandvik chamfer cutter.
if anyone else out there programs similarly, i would appreciate any macros you have written that you could share with me.
much thanks.........scott
if anyone else out there programs similarly, i would appreciate any macros you have written that you could share with me.
much thanks.........scott