Custom Weight and CoG report in Shipbuilding

[Ildiiiii]

Hi all,

I need to measure the weight and center of gravity of each section along my ship.

I need to export this information to a spreadsheet.
There is the Weight and Center of Gravity feature in the basic design module, which exports the weight and CoG of a certain section to a spreadsheet. But how can I modify this so that my spreadsheet will show the weight and CoG of all of my sections along the ship? Here is a picture how I imagine it.

I tried to record the steps with a journal, but it doesn't help me a lot, it doesn't record creating the excel. (When I use this feature without recording, then it shows the excel with the information at the end, but when I use the feature while recording, it doesn't even show the excel at the end.)
When I play it back, nothing happens.

Do you have a good idea how it could be solved? I'm using NX12. Thanks in advance,

I

 

[jerry1423]

Don't forget to specify the version of NX that you are on.

Jerry J.
UGV5-NX1884