Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

customizing icons

Status
Not open for further replies.

Shawnbert

Mechanical
Aug 26, 2002
1
Each time I start UG, the icons are rearranged from where I put them last time. How can I get them to stay where they are so that the next day I don't have to change everything to the way I like it?
 
Replies continue below

Recommended for you

If you are working with the same system and same login your Unigraphics session settings will be saved for your login.If you open different parts in the same login you will get the same session settings.Just try this.
 
Rearrange your button settings as you like, then Preferences->User interface (i dont remember exactly the menu names but it must seem like this) put a tick to the "save layout on exit" command. next time you start UG you must probably find the appereance as you set. You may untick the command to prevent accidental changes to the layout. caeserean
C.U. Mech. Eng. Dept.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor