Jun 10, 2021 #1 azadfar Industrial Jan 15, 2015 7 Hello everyone, is it necessary to use argon gas to cut 304 stainless steel? It is possible to use oxygen and then grind the edges. Thank you
Hello everyone, is it necessary to use argon gas to cut 304 stainless steel? It is possible to use oxygen and then grind the edges. Thank you
Jun 10, 2021 #2 DVWE Petroleum Apr 5, 2007 2,248 Hello everyone, is it necessary to use argon gas to cut 304 stainless steel? Click to expand... No. It is possible to use oxygen and then grind the edges. Click to expand... No. Stainless steel is usually thermally cut with a plasma cutter and nitrogen shielding gas. The devil is in the details; she also wears prada. Upvote 0 Downvote
Hello everyone, is it necessary to use argon gas to cut 304 stainless steel? Click to expand... No. It is possible to use oxygen and then grind the edges. Click to expand... No. Stainless steel is usually thermally cut with a plasma cutter and nitrogen shielding gas. The devil is in the details; she also wears prada.
Jun 10, 2021 #3 SnTMan Mechanical Jan 22, 2005 6,785 Abrasive waterjet works well for thick sections. Regards, Mike The problem with sloppy work is that the supply FAR EXCEEDS the demand Upvote 0 Downvote
Abrasive waterjet works well for thick sections. Regards, Mike The problem with sloppy work is that the supply FAR EXCEEDS the demand
Jun 11, 2021 #4 Guest I would consider nitrogen as the minimum and argon the optimum for plasma arc cutting. Neither are very expensive. "Everyone is entitled to their own opinions, but they are not entitled to their own facts." Upvote 0 Downvote
I would consider nitrogen as the minimum and argon the optimum for plasma arc cutting. Neither are very expensive. "Everyone is entitled to their own opinions, but they are not entitled to their own facts."
Jun 11, 2021 #5 horacio Torres Chemical Mar 22, 2021 128 Plasma arc cutter is the right equipment Upvote 0 Downvote
