Theelectricalengineer
Electrical
Hi this is my first post on eng-tips.
I have a project where I need to run 75m of 2 x circuits of 630sqmm Al cable 3 cables per phase total load of 60MVA at 22kV(STEADY STATE). At N-1 scenario one circuit needs to take 78MVA (CYCLIC LOADING). could some one guide me how to do a cyclic loading analysis on CYMCAP. The load factor is .68. I am getting different opinions on doing cyclic and transient analysis. please let me know someone could help me.
I have a project where I need to run 75m of 2 x circuits of 630sqmm Al cable 3 cables per phase total load of 60MVA at 22kV(STEADY STATE). At N-1 scenario one circuit needs to take 78MVA (CYCLIC LOADING). could some one guide me how to do a cyclic loading analysis on CYMCAP. The load factor is .68. I am getting different opinions on doing cyclic and transient analysis. please let me know someone could help me.
