Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Damage Curves

Status
Not open for further replies.
IASMike

IASMike

Electrical
Mar 22, 2005
25
Can anyone tell me where I can find the electrical cable damage curves ?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
If you have a software like SKM or ESDA for short circuit and coordination study, it should contain damage curves almost all common cable type and sizes.

Failing that contact one or two good cable manufactures and they should be able to provide you the same. Also try visiting websites.

I do not know, but some publications may have damage curves for generic (most common) cables.
 
Upvote 0 Downvote
We use etap but it is missing some of the damage curves. I know one of the IEEE standards has generic damage curves in it but I do not remember which one.
 
Upvote 0 Downvote
Try okonite.com
Look under engineering technical data and then short circuit currents adn then conductor data.
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top Bottom