Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Damage Evalution Problem

Status
Not open for further replies.
aslfd

aslfd

Materials
Feb 5, 2015
20
Hello,

I study a damage problem (Dynamic-Temp_disp Exp) between a tack (nail) and two sheets. At th end of the simulation there is no damage on the sheets
Tack is analytical rigid
Sheets are deformable
I use a JK platicity and a JK damage
Capture_nuffls.jpg

1_jn2i0o.png

2_xmgip3.png


Thanks
 
Status
Not open for further replies.

Similar threads

jball1
  • Question
Connector Damage/Failure
Replies
6
Views
285
jball1
jball1
DavidMcArthur
  • Question
ABAQUS Explicit Damage
Replies
2
Views
269
DavidMcArthur
DavidMcArthur
Oluwakay
  • Locked
  • Question
HASHIN DAMAGE MODEL FOR SOLID
Replies
1
Views
70
FEA way
FEA way
hwa0725
  • Locked
  • Question
ABAQUS Ductile Damage Initiation Criterion
Replies
4
Views
122
hwa0725
hwa0725
nilesh_dot
  • Question
Problem during linking - Abaqus/Standard User Subroutines
Replies
2
Views
310
nilesh_dot
nilesh_dot

Part and Inventory Search

Sponsor

Back
Top Bottom