Dapper-Single Phase Panel

[msterry21]

Hi, I am using the Dapper program from SKM version 6.0 and I have a question for anyone with some expertise on this.

I'm designing a commercial building and want to connect several SINGLE phase panels to my distribution panel. My problem is that when I set my panels to single phase and connect them to my distribution panel, they connect as a three phase load. What can I do to correct this? I'd really appreciate the help.

 

[davidbeach]

You need to be using the unbalanced studies. If you haven't paid for the unbalanced module, you will find that everything becomes a 3-phase load.