Dear engineers, I am creating a

[sneves]

Dear engineers,

I am creating a comparisson between load testing requirement for mechanical handling equipment listed in different standards. The idea is to choose the best standard and incorporate it in our company specifications.

I am now analysing the British Standards. I found BS 2853 for design and testing of runway beams however I couldn't find anything similar for pad eyes.

Does any body know where can I find a British Standard for design and testing of pad eyes?

Thanks in advance for your comments.

Best regards,
Neves

 

[robyengIT]

Hope it can help :

german DIN 582 or Standards by DNV

https://rules.dnvgl.com/docs/pdf/DNV/stdcert/2011-10/Standard2-22.pdf

 

[BEMPE16524]

Hi,
You can check BS EN 12079-1:2006
Offshore containers and associated lifting sets —
Part 1: Offshore containers — Design, manufacture and marking

Follow this link:

http://img.21food.cn/img/biaozhun/20100108/187/11286064.pdf

see section: 5.4.7 Pad eyes


Also, BS EN 12079-3:2006
Offshore containers and associated lifting sets —
Part 3: Periodic inspection, examination and testing

http://www.dnv271containers.com/EN120792006/EN120792006.pdf

 

[sneves]

Dear RobyengIT,

Thanks for your response.

I was searching specifically in the BS standards. Anyway thanks again for your help.

Regards,
Neves