Abbas shafiee
Mechanical
- Jul 28, 2020
- 6
I am running a simulation of bearing dynamic in Adams. One of the parts is flexible and it makes my simulation long especially the output file and when I want to use post-processor, it takes 3 hours to load animation. It is frustrating.
Noted that I am using my own subroutine for contacts and forces except for the flexible body which is imported by MNF and uses Adams's contact model.
Now my question is how I can keep my time step constant while decreasing stored date in order to help post-processor and decrease the file size?
In the following picture, you will see my setting for the integrator.
and setting for my executable where I had to define my subroutine.
Noted that I am using my own subroutine for contacts and forces except for the flexible body which is imported by MNF and uses Adams's contact model.
Now my question is how I can keep my time step constant while decreasing stored date in order to help post-processor and decrease the file size?
In the following picture, you will see my setting for the integrator.
and setting for my executable where I had to define my subroutine.
