I am having trouble finding any default corrosion rates to apply to equipment that was only inspected once for ACTIVELY CORRODING EQUIPMENT, (ex. process piping, pressure vessels, etc. with active corrosion/pitting). I this will not determine acurate life of the equipment, although I want a conservative approach without overkilling the life determination/next inspection. Even where to find it in the codes/standards would help. Thank you.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Default corrosion rates for actively corroding carbon steel
- Thread starter W0lfw00d
- Start date
Unless you have any other sort of monitoring going on, you will not get any 'default' rates as you will have a very specific metal environment combination. What was the predicted corrosion rate from the design? Comparison of your one inspection result with this value should be your starting point. API 580 and 581 will guide you.
Steve Jones
Materials & Corrosion Engineer
Steve Jones
Materials & Corrosion Engineer
RBI (Risk Based Inspection) as jones said is the best approach. you'll find a technical module for all the different corrosion types to assess the corrosion rate and define risk and inspection plan.
S
Corrosion Prevention & Corrosion Control
S
Corrosion Prevention & Corrosion Control
- Status
Similar threads
- Locked
- Question
- Locked
- Question