Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
DELTIM command
- Thread starter cotdien
- Start date
Hi,
I fear your question isn't very clear. However, I suspect you have AUTOTS,ON in your analysis: in this case, the DELTIM setting can be overridden if there are convergence problems with the assigned timestep: bissection will occur for the necessary number of times, unless the max number of substeps is reached or overcome.
Regards
I fear your question isn't very clear. However, I suspect you have AUTOTS,ON in your analysis: in this case, the DELTIM setting can be overridden if there are convergence problems with the assigned timestep: bissection will occur for the necessary number of times, unless the max number of substeps is reached or overcome.
Regards
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question