Demister with gradual reduction in density of wire.

[pve5]

Could any one suggest source to procure demister with 6'-0" diameter x 12 inch thick with 12 lbs/ft3 density at top and 5 lbs/ft3 at bottom. Material SS 304L.

The reduction in density shall be gradual.

Thanks in advance

 

[codeeng]

I've seen this done in 3 separate sections. Try Raschig or Koch-Glitsch.

 

[unclesyd]

Here is good starting point for mesh pads. We got ours through MECS, That was because they were part of our company. We did sneak in few others.

http://www.sulphuric-acid.com/Sulphuric-Acid-on-the-

Web/Equipment/mist_eliminators.htm