Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dental X-Ray to Bite Simulation

Status
Not open for further replies.
rstupplebeen

rstupplebeen

Mechanical
May 9, 2007
1,281
Designing a medical device commonly starts with the healthy or diseased anatomy. Geometry without significant simplifications typically comes from various 3D scanning technologies such as CT or MRI. Here we will go through turning scanned point cloud data into usable NURBS CAD geometry with Catia.

Link

I hope that this is helpful.


Rob Stupplebeen
OptimalDevice.com
My LinkedIn
 
Jaw033115_wgpeg4.gif



Rob Stupplebeen
OptimalDevice.com
My LinkedIn
 
Status
Not open for further replies.

Similar threads

C
  • Question
New MRI device to help save our lives
Replies
3
Views
4K
hacksaw
hacksaw
SamanthaL
  • Locked
  • Question
How can gene editing technologies optimize microbial production of hyaluronic acid to increase yield and reduce costs?
Replies
2
Views
4K
Compositepro
Compositepro
saja11
  • Locked
  • Question
Knee X-ray Image Analysis
Replies
1
Views
581
IRstuff
IRstuff
vivian12
  • Locked
  • Question
New coronavirus spike protein has been shown to inhibit lung cancer development
Replies
1
Views
1K
EdStainless
EdStainless
saja11
  • Locked
  • Question
Softwares recommendation for constructing 3-D joint models of knee from Planar X-rays
Replies
4
Views
209
ModuliTechnologies
ModuliTechnologies

Part and Inventory Search

Sponsor

Back
Top Bottom