DEP 61.10.08.11 - Gen Field Inspection states to carry of site testing of PSV prior to installation. Is there any clarification that the word "site" is not be read literally as physical project site but could be carried out at approved workshop in the project location/city
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
DEP clarification regarding PSV testing/Calibration
- Thread starter Ebyate
- Start date
DEP is clear.
Careful handling of safety / relief valves in transit is important
Rough handlingcan can change the pressure setting.........
Safety / Relief valves should be treated as delicated instruments.
"DEP 61.10.08.11-GEN is for "FIELD Inspection prior to commissioning of mechanical equipment"
Do it on SITE !!
Regards
Careful handling of safety / relief valves in transit is important
Rough handlingcan can change the pressure setting.........
Safety / Relief valves should be treated as delicated instruments.
"DEP 61.10.08.11-GEN is for "FIELD Inspection prior to commissioning of mechanical equipment"
Do it on SITE !!
Regards
- Status
Similar threads
- Locked
- Question
- Locked
- Question