Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

DEP clarification regarding PSV testing/Calibration

Status
Not open for further replies.

Ebyate

Mechanical
Jul 27, 2016
20
DEP 61.10.08.11 - Gen Field Inspection states to carry of site testing of PSV prior to installation. Is there any clarification that the word "site" is not be read literally as physical project site but could be carried out at approved workshop in the project location/city
 
Replies continue below

Recommended for you

DEP is clear.
Careful handling of safety / relief valves in transit is important
Rough handlingcan can change the pressure setting.........
Safety / Relief valves should be treated as delicated instruments.

"DEP 61.10.08.11-GEN is for "FIELD Inspection prior to commissioning of mechanical equipment"

Do it on SITE !!

Regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor