I have Aspen HYSYS and i need to perform Depressuring using RO located at the vapor line. However i have noted that in depressuring RO details are not able to enter. Can you please help me how to perform Depressuring using RO?. I have done depressuing using Control valve earlier in my project.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
Depressuring using RO (Restriction Orifice) in Aspen HYSYS
- Thread starter ShoyebM
- Start date
Hi,
Consider the link underneath with a video :
Another option could be to contact ASPEN Tech .
Good luck
Pierre
Consider the link underneath with a video :
Another option could be to contact ASPEN Tech .
Good luck
Pierre
- Thread starter
- #3
- Status
Similar threads
