Design Assessment 1

[chris456s]

Workbench 18.2
I have been doing solution combinations in Design assessment because the solution scoping options are better than in the Solution Combinations option.
But on my current project the Design Assessment freezes during the solution process.
It never gets past the first stage "Resuming CAERep...."
It only took 4min to solve each one of the upstream Static Structural solutions but Design Assessment is stuck for 24hrs on "Resuming CAERep..."
Has anyone seen this?

 

[chris456s]

I figured it out.
I had lot of very large Named Selections set to "Send to Solver" = Yes.
None of them were necessary for the solver. Changing them to "No" made the Design assessment solve fast