Hi,I need information about combustion chamber design (combustion calculations,heat transfer process,estimated and design of burners...)
The device is a tubular reactor(6´´ID) that will be inside of combustion chamber (tubular too,15´´ID) and will be heated for burners of natural gas.
I Know the heat rate tubular reactor needs: about 5 kW (feed in reactor is only 10 kg/h)
My doubt is how to obtain a model of heat transfer and energy balance (burners->flame radiation->heat transfer of gas combustion [radiation and convection]-> refractory emissions->heating of steel reactor....)
I´ve been looking at several e-books (incropera,kern,perry..., but i haven´t found something.
Do you know any book or manual about this questions?
Thank you very much.
The device is a tubular reactor(6´´ID) that will be inside of combustion chamber (tubular too,15´´ID) and will be heated for burners of natural gas.
I Know the heat rate tubular reactor needs: about 5 kW (feed in reactor is only 10 kg/h)
My doubt is how to obtain a model of heat transfer and energy balance (burners->flame radiation->heat transfer of gas combustion [radiation and convection]-> refractory emissions->heating of steel reactor....)
I´ve been looking at several e-books (incropera,kern,perry..., but i haven´t found something.
Do you know any book or manual about this questions?
Thank you very much.
