Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design Guide to Concert Precast Post bases.

Status
Not open for further replies.

chorner26

Petroleum
Mar 24, 2008
38
Are there any design guide or data on how to size a precast concert post base for deck in California. Yes I know how to size footings, but can't find anything on this.
 
Replies continue below

Recommended for you

Do you mean "concrete" post, like Portland cement? Not concert?
 
Sorry to hi-jack/revive this silly thread,

I get a lot of grief from contractors about deck footings - I usually spec small pads with a rebar grid and dowels into the upstand. I can see that its a lot of steel and painful formwork for pretty light loads.

Had some contractors request to use these,


and I'm thinking about making them my standard spec, even though it is a proprietary product. With the slope on the top of the footing, I'm feeling comfortable to do away with most of the steel I usually spec.

thoughts?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor