Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Design guidelines / process for LNG recondenser

Status
Not open for further replies.

sasa000

Chemical
Jun 7, 2022
8
0
0
GB
Does anyone know of a good resource/design guideline/calc for the design of a LNG gasification terminal boil off recondenser?

Specifically a typical top packed bed co current type.

Been scouring the web and not finding much. I appreciate the specific design is fairly proprietary, but this is just for concept, so a generic sizing will do.
 
Replies continue below

Recommended for you

There is a brief discussion on heat transfer effects in liquid dispersed contactors starting from page 14-54 in Perry Chem Engg Handbook 7th edn. - see if this helps.
 
Gas Processing news had some good articles from Vopak and JFE Engineering. More compact BOG recondensers have been designed using static mixers.
Otherwise it'll be more generic info from textbooks etc. Coulson and Richardson v.6
 
Status
Not open for further replies.
Back
Top