Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design of billboards

Status
Not open for further replies.

Smitash

Civil/Environmental
Sep 20, 2012
17
Hi,
Can anyone tell me the name of a book which has got the design for billboards?
I have got one but there is no design for billboards in that.
Thanks
 
Replies continue below

Recommended for you

ASCE makes a good one for the wind load, AISC makes a good one for the steel deisgn. I am not sure there is a book devoted to this.
 
There is no book for billboards as such I believe. With those above references, basic engineering is the rest.

I did a couple of those huge casino marquees in Las Vegas without benefit of written procedure.
 
Smitash,

Engineering Sign Structures: An Introduction to Analysis and Design [Hardcover]
Benjamin Jones (Author)
ISBN-10: 0944094309

This is a nice reference book for typical freestanding sign and marquee design principles, however it is lacking on the technical side. If you're just starting to get into signage design it may a good book to have in your library.
 
Smitash,

Do you have drawings of an older project, or ability to go out and observe general arrangement of billboard structure?
 
Yeah, when I'm working on something new where I can find examples out in the world I'll generally just go out and take lots of pictures of them and sit down and figure out what other people do.

As far as analysis, it's likely going to be wind driven. For loading I'd look at your local building code as well as your highway/transportation code. Highway departments tend to put up all sorts of signs.

You could try contacting the Outdoor Advertising Association of America. I know they at least used to do/sponser a bit of engineering research and might be able to point you towards billboard specific information if you really want to track it down. I have an old embeded post foundation method that they published.
 
The overturning load on the casino marquee footing was so large that we provided a huge mat foundation. I don't have any idea what a highway billboard for example will be like.
 
Smitash:
There have been a couple other threads on this general topic, one within the last few weeks, namely, thread256-359373, in the Foundation Engineering forum. Search the general subject.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor