Nov 26, 2009 #1 prakash20305 Automotive Feb 15, 2009 3 I have been assigned to design a external gear pump. It would be great if anyone provide a step wise procedure in design of external gear pump.
I have been assigned to design a external gear pump. It would be great if anyone provide a step wise procedure in design of external gear pump.
Nov 26, 2009 #2 SNORGY Mechanical Sep 14, 2005 2,510 External? My experience has been that they actually work better with the gears on the inside. Regards, SNORGY. Upvote 0 Downvote
External? My experience has been that they actually work better with the gears on the inside. Regards, SNORGY.
Nov 26, 2009 #3 SNORGY Mechanical Sep 14, 2005 2,510 That said... I would start by scouring everything you can find out about Viking Pumps. There is lots of good information about them and their product out there. Regards, SNORGY. Upvote 0 Downvote
That said... I would start by scouring everything you can find out about Viking Pumps. There is lots of good information about them and their product out there. Regards, SNORGY.
Nov 26, 2009 #4 A Artisi Mechanical Jun 11, 2003 6,478 Someone else trying to re-invent the wheel again . Upvote 0 Downvote
Dec 2, 2009 #5 MJCronin Mechanical Apr 9, 2001 5,087 SNORGY..... The difference between internal and external gear pumps can be found here: http://en.wikipedia.org/wiki/Gear_pump In my opinion, somewhere in the third world, the terms "design" and "specify" are interchangable.... this leads to confusion on these fora. -MJC Upvote 0 Downvote
SNORGY..... The difference between internal and external gear pumps can be found here: http://en.wikipedia.org/wiki/Gear_pump In my opinion, somewhere in the third world, the terms "design" and "specify" are interchangable.... this leads to confusion on these fora. -MJC
![[laughtears]](/data/assets/smilies/laughtears.gif "[laughtears] [laughtears]")
.
