Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
design of rectangular tanks
- Thread starter rajeev383
- Start date
Generally, the approach would use the rectangular flat-plate formulas in Roark's Formulas for Stress and Strain. Watch the maximum plate-deflection criteria.
I believe there is a design guide for rectangular concrete tanks, but I am not familiar with the details of it.
I believe there is a design guide for rectangular concrete tanks, but I am not familiar with the details of it.
LittleInch
Petroleum
Have you tried searching on this site for "rectangular tanks"
Gems like this come up which also link to other posts
or try this
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
Gems like this come up which also link to other posts
or try this
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
