Mar 28, 2017 #1 ullhas58 Mechanical May 13, 2013 4 0 0 IN hi, I have generated design simulation for a typical cantilever type al squre section, applied load on one side etc. report is created. I want to know how to view image? or view report?
hi, I have generated design simulation for a typical cantilever type al squre section, applied load on one side etc. report is created. I want to know how to view image? or view report?
Mar 30, 2017 #2 FSB1 Aerospace Sep 23, 2013 71 0 0 BE what do you want to see? displacements? disp(plot)=all stress? stress(plot)=all ... Upvote 0 Downvote
Apr 2, 2017 #3 ThomasH Structural Feb 6, 2003 1,174 1 36 SE Hi What version of Nastran are you using (Autodesk/MSC/NX) and what postprocessor? Leo16 describes how to make the solver do it. But as I understand it, that is not the question. Correct? Thomas Upvote 0 Downvote
Hi What version of Nastran are you using (Autodesk/MSC/NX) and what postprocessor? Leo16 describes how to make the solver do it. But as I understand it, that is not the question. Correct? Thomas
