Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Designing a trial shape for a new soil steel-concrete composite bridge using Abaqus

Status
Not open for further replies.

Nalintha

Civil/Environmental
Jan 10, 2020
2
I am knd of new to Abaqus. Recently I am trying to analyze a suitable trial shape for a soil steel-concrete composite bridge. When considering the practical case, I know that the angular slab that I have introduced should bend without steel plate penetrating into it. (CAE file has been attached with this).

But, after running the job, the steel plate that I have introduced always penetrates into the angular concrete slab. Hence, it is clear that I am making some kind of mistake. Can you guys help me with this. Thank you.
 
 https://files.engineering.com/getfile.aspx?folder=934d76df-85c0-45cf-8d44-064532e40db9&file=Analysis.cae
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor