Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Determinatiom of initial consumption of lime(ICL)

Status
Not open for further replies.

msesi

Materials
May 15, 2010
21
0
0
EU
I'm currently carrying out some test for determining the initial consumption of lime(ICL)for a certain soil materials taken from borrowpits.The soil laboratory where the test are carried out gave me a wonderful test results. They gave me 5 to 6%cement to cater for the initial consumption of lime/cement. In principle, according to my experience in African soils, it usually range from (0.5 to 1) %lime or cement. Please if there is some one knows the reason for this outcome; assist because it is my first time to see such kind of test results.
 
Replies continue below

Recommended for you

msesi...please don't double post your question in different forums. That is against the site rules.

Red Flag your post and it will be removed by management.
 
Status
Not open for further replies.
Back
Top