Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

DFLUX- Subroutine

Status
Not open for further replies.

black widow

Automotive
Mar 3, 2017
1
thread799-385679

Hello all!

I am a newbie to eng-tips and this is my first post. Please excuse me if have not followed any of the rules of this forum. I have restarted thread799-385679 because I thought it would be a nice introduction to dflux subroutine that I have to use it for my academic work.

I am assigned an academic task of simulating induction heating process in abaqus. I have succeeded in simulating induction heating process (involving electromagnetic and heat transfer analyses) on a plate when the coil is stationary. Both coil and plate are enclosed by air medium. Now, I have to provide movement to the coil to simulate dynamic heating on the plate.

I have zero knowledge in writing subroutines. So I thought of following polak7's thread799-385679 as an example but did not achieve the result as he did. I just ended up heating the whole plate. So, I would like to request polak7 to provide me with .cae file or .inp file for me to understand things slightly better. If you can provide, it will be a very good start for me as I am not able to find simple examples. Also, I would greatly appreciate if someone can provide any useful links or documentation regarding dflux subroutine.

Thanks in advance.

 
Replies continue below

Recommended for you

There are two examples in the Verification Manual.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor