DIALOG DEFAULTS

[spottydot]

IS THERE A WAY TO CHANGE THE DEFAULTS ON THE DIALOGS. FOR EXAMPLE EVERY TIME I PICK GEOMETRY FOR PLANER MILLING I CHANGE THE MATERIAL SIDE FROM LEFT TO RIGHT.

 

[looslib]

Do the positions on the entity where you pick have any effect on the bounndry side? Try picking in a counterclockwise direction. The position of the second pick to the first pick used to have a vector effect for establishing cut direction.


"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[wmalan]

Change this setting to 1 instead of the default 0 in your ug_cam.def file:

CAM_bnd_typ: 1

--
Bill