Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Discarding Empty Drums

Status
Not open for further replies.

rexfire

Industrial
Jul 1, 2011
10
0
0
US
We have drums that are empty. These drums used to have anywhere from latex paint, hydraulic oil, vanishing oil, cleaner/degreaser. We also have some drums that have had hazardous material in it (isocyanate). For the non-hazardous drums do they just need to be empty (less than 1") and take them to a metal scrap facility? Can you do the same with the glue drum or do you need to triple rinse it before discarding?
 
Replies continue below

Recommended for you

What we did with empty drums whether they contained oils, solvents, asphalted products, etc which we used on bridge construction was to flatten them with a bucket loader and have them removed as scrap metal.
 
Status
Not open for further replies.
Back
Top