Discrepancy b/w Specification and Quality Plan? 1

[pipefabs]

I am a new piping engineer. I am a bit confused here...

"Specification for Pressure Control Valve" for the project says,
"The seat leakage test shall be in accordance with Standard ANSI/FCI 70-2"

"Quality Plan/ITP" of the valve vendor says,
Product Assembly & Test
Functional Test as per ANSI/FCI 70-3-2004
Seat Leakage test as per ANSI/FCI 70-3-2004.

Could anyone please tell if these are same and can be adopted for the project?
If they are same, does the statement in specification requires correction?

Thanks in advance

 

[hsbcn]

These are FCI 70-2 and FCI 70-3 are similiar, but not identical, so it would be best to revise the specification.

My focus: Alloy Valves Duplex Valves Monel Valves Inconel Valves [link titanium-valves.com]Titanium Valves[/url] Hastelloy Valves