Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Display of licence in workplace

Status
Not open for further replies.

aks1953

Mechanical
Apr 19, 2008
1
1.What may be the consequences if Professional Engineering Licence of Ontario is not displayed at workplace? I was asked by my superior to display the licence at my workplace in Ontario.
2.In Ontario,what are the possible reasons for including moonlighting under code of ethics.
 
Replies continue below

Recommended for you

1) Dismissal for non-compliance with this request.
2) Pirating you employer's clients.
 
moonlighting is also about using company resources for your after-work job (ie: software, time etc..)

As far as displaying your licence the following is in the PEO's Code of Ethics:…..
2. A practitioner shall…...
iv.endeavor to keep the practitioner's licence, temporary licence, limited licence or certificate of authorization, as the case may be, permanently displayed in the practitioner's place of business.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top